3‑in‑1 Foldable Wireless Charging Station (15W — USB‑C / QC3.0)
The Intent
Single, compact dock for simultaneous wireless charging of a smartphone, Apple Watch and true‑wireless earbuds. Designed as a foldable, travel‑ready stand with a status breathing LED and case‑friendly charging areas so you can set devices down and keep working or sleeping without cable clutter.
Verified Specs
- Phone output: 15W / 10W / 7.5W / 5W (max 15W when used with QC3.0 or other 15W‑capable adapter)
- Watch output: 2.5W (built‑in Apple Watch charging puck; no separate watch cable required)
- Earbud output: 3W (requires earbuds with wireless charging case)
- Input: USB‑C, 9V/2A or 5V/3A (QC3.0 recommended for full 15W phone output)
- Charging port: USB‑C (one cable included)
- Form factor: Foldable stand; vertical and horizontal phone placement supported
- Dimensions: 165 × 141.3 × 13 mm
- Material / Color: Plastic + acrylic / White
- Case tolerance: Charges through protective cases up to ~5 mm (0.2 in) thickness — magnetic or metal‑backed cases may block charging
- Included in box: 3‑in‑1 wireless charger ×1, Type‑C charging cable ×1, QC3.0 adapter ×1, Manual ×1
- Compatibility summary: Qi‑enabled phones (iPhone 8 and later, including iPhone 12/13/14/15/16/17; Samsung Galaxy S series and other Qi devices), Apple Watch Series 2–10 (see notes below), AirPods Pro/AirPods with wireless charging case, Galaxy Buds and other TWS earphones with wireless charging case
The Benefit
Consolidates three chargers into a single foldable platform to remove cable clutter and free outlets. The rear adjustable stand aligns the phone and watch coils for reliable charging in portrait or landscape. Anti‑slip silicone pads and heat‑dissipation vents maintain mechanical stability and thermal control during multi‑device charging. The blue breathing LED provides an unobtrusive night indicator (touch control to toggle).
Operational Assurance
- Safety systems: Built‑in protection against over‑current, over‑voltage, over‑temperature and short circuit, plus foreign object detection (FOD).
- LED status meanings: steady/breathing blue = normal charging; flashing blue = foreign object detected or misalignment. Touch the control area to turn the LED off.
- Troubleshooting & best practices:
- Ensure each device supports Qi wireless charging before use.
- For maximum phone speed (15W) use the supplied QC3.0 adapter or an equivalent 15W adapter — do not rely on standard 5V/1A USB ports for fast charging.
- MagSafe magnets in iPhone 12–17 models can interfere with non‑MagSafe charging coils; charging may be slower. If a large Pro Max model does not align, try horizontal placement or a thinner case.
- Phone cases with metal, magnets or credit cards will trigger FOD and prevent charging; remove or replace these cases if needed. Not compatible with some heavy duty cases (e.g., certain OtterBox models).
- Apple Watch: built‑in watch charger supports Apple Watch Series 2–10. Not compatible with Apple Watch Series 1, many non‑Apple smartwatches, and some reported firmware‑specific issues (for example, reported incompatibility with certain Series 7 units on older watchOS builds).
- AirPods Gen1 or AirPods 2 without a wireless charging case will not charge; confirm your earbuds have a wireless charging case.
- If a device fails to charge, confirm correct alignment to the corresponding charging area, try restarting the device (iOS bugs have been reported to affect wireless charging), and verify you are using the supplied adapter and cable.
- Maintenance: Keep charging surfaces clean and free of debris; avoid placing magnetic accessories between the phone and charger.
- Warranty & support: Follow the included manual for setup and safety instructions. Contact seller support if device remains non‑functional after following troubleshooting steps.